PLEATED LINE MESH
WORKCENTER
The "workcenter 15/20 - 3000 mesh E PROFILES" is a very advanced work station produced for the processing of mesh pleats with 15mm and 20mm folds, height 3000mm and aluminium profiles. The machine carries out the simultaneous operations of drilling of the meshside clamps, processing of the side clamps, application of the edgebanding element and drilling of the 4 side profiles 8 for the yoke 0,22) in a single cycle of processing allowing a considerable saving of time.
Dimensions (mm): 4900x1300x1000
KOMBI EASY
The "Kombi Easy with Table" is a work station produced for the processing of mesh pleating, with loading table for inserting the order-pass complete with guides.
Dimensions (mm): 6740 (2600 + 4140) x800
AUTOMATIC CUTTING TWO HEADS
The "Automatic Two-Head Cutting" is an advanced automatic machine produced for double-sided cutting meshes with automatic setting of the cutting length. The machine cuts both sides of the machine simultaneously mesh in a single operation.
Dimensions (mm): 3800x1200x565
MANUAL CUTTING
The "manual cutting" is a machine produced for the cutting of the plisetted nets with manual setting of the measure. Thanks to a mobile match on a sled and a precise tachometer you can easily set the length of the desired cut.
Dimensions (mm): 3270x1000x565
TWO HEADS PRESSETTE BENCH
The "Banco Pressette 2 Teste Gioconda 0,22" is a mechanical machine produced for the drilling of insect screens the profiles necessary for the fixing 0,22 Gioconda series.
TEMPLATE WITH FEEDBACK
The "Plissè/Flexa BASE Test Jig" is a mechanical tool produced for the verification of the correct functioning of insect screens plexè and flexa.
Dimensions (mm): 2320x3200x890
TEMPLATE WITHOUT FEEDBACK
The "Plissé/Flexa/Jolly Test Jig without feedback" is a mechanical tool produced to verify the correct functioning of insect screens pleats and flexed or Jolly.
Dimensions (mm): 2320x3200x890
DIMA GIOCONDA 0.18 – 0.22
The "Test Jig Gioconda 018 - 022 " is a mechanical tool produced to verify the correct functioning of the insect screens Gioconda 0.18 and Gioconda 0.22 series. Thanks to its ease of use and its high precision it insect screens allows to verify a large number of possible malfunctions or imperfections present.
Dimensions (mm): 3310x3120x1000
PLISSÈ TRACK TEMPLATE
"Dima Cingoli Plissè It is a useful sheet of pre-printed and plastified work that allows the simple sizing of the chain of tracks by setting the exact number of tracks necessary for the production.
AVAILABLE: "Plissé Zero Track template" is a useful preprinted and plastified sheet of work that allows the simple sizing of the chain of the tracks by setting the exact number of tracks necessary for the production.
DIMENSIONS TEMPLATE CORDS
The "Lanyard Sizing Jig" is a tool designed for the correct sizing of lanyards according to the size of the mesh.
ALUMINIUM PROFILE TABLE
CHECK CLEANING PREPARATION
The "Aluminium preparation table" is a working bench that can be used for the installation of aluminium in order to make it easier to check and clean.
FOLD PACK
The "FOLD PACK" is a semi-automatic machine produced for the quick packing of the insect screens Plissé, Frontal 40 and Flexa.
DIMENSIONS TEMPALTE OF 8
The "8" Wire Sizing Jig is a mechanical system used to size the lanyards needed for double winding when opening and closing the insect screen. The system can be anchored to a work table.
ASSEMBLY TABLE
TRACK HOLDER WITH DRAWER
The "Assembly Table with Drawer Tracks" is a workbench including all the elements necessary for the assembly of the insect screens pleats.
OPTIONAL: CORDS ROLL HOLDER
The "Cords holder" is a mechanical system consisting of a pair of cords rolls and a structure To properly guide the cords during its use.
PACKAGING ASSEMBLY TABLE
The "Packaging Assembly Table" is a practical workbench that can be used to pack insect screens. The table has a support surface for the meshes boxes.
TABLE COUNTS AND CUTS FOLDS
WITH SLIDING DOORMESH
The "Counting and Cutting Folds Table" is a large workbench that can be used for sizing and cutting in mesh the initial phase of its processing.
TABLE COUNTS FOLDS
THREE SLIDING PLANES
The warehouse mesh is equipped with three shelves for the storage of the boxes meshes and three sliding shelves to contain the sheet mesh.
MAGNET AND BRUSH HOLDER
The "Magnet holder e brush" is a mechanical aluminium system used for the support of magnet rolls and brush necessary for the construction of insect screens.
Its features allow the simultaneous use of magnet rolls and brush also different sizes.
Dimensions (mm): 725x1020x780
BIADHESIVE APPLICATOR
The "Double-sided adhesive ground guide applicator 0.22" is a mechanical machine produced to apply the double sided adhesive on the back of the ground guide of the insect screens gioconda 0.22 lateral series.
It is an optional of the two heads portable 0.22 is composed of a series of rollers on which the guide slides and a biadhesive roll support.
PLISSÈ TOOL BAG
The "Plissè tool bag" of textile material consists of several compartments, equipped with shoulder strap and reinforced fabric handle.
The plastic closure is mechanical, while on the front of the bag there is a zipper pocket.
The internal compartments are suitable to contain both paper documents and the tools provided: pleating cutter, positioning meshtemplate, French screwdriver, crosshead screwdriver, lanyard threader and lanyard puller.
HOOKING TEMPLATE
CLOSING PROFILE 0.22
The "Jig Profile Hooks Closure 0.22" is a practical mechanical tool that can be used for the correct fixing hooking of the closure profiles of the insect screen Gioconda 22.
Made of plastic material and is equipped with special lateral grooves.
Dimensions (mm): 140x20x34
MAGNET HOLDER
The "Magnet Holder" is a mechanical aluminium system used for the support of magnet rolls necessary for the construction of insect screens.
Its characteristics allow the simultaneous use of several rolls of magnet also of different size.
Dimensions (mm): 400x1070x460
HANDLING TROLLEY
HORIZONTAL ALUMINIUM
The "Horizontal trolley door Aluminium" It is composed of an aluminium structure equipped with arms to support the aluminium bars. By means of the four wheels positioned at the base it is possible to make the displacement of the same.
Dimensions (mm): 1920x1710x710
HANDLING TROLLEY
THREE SHELVES
The "trolley 3 shelves handling" is composed of an aluminium structure equipped with arms and shelves to support meshes or products.by means of the four wheels positioned at the base it is possible to move it.
Dimensions (mm): 2400x1500x400
HANDLING TROLLEY
A SHELF
The "1 Shelf handling trolley" is composed of an aluminium structure equipped with arms and shelf to support meshes or products.by means of the four wheels positioned at the base it is possible to move it.
Dimensions (mm): 2000x1150x530
TRACK TROLLEY
The "trolley holder tracks" It is made up of an aluminium structure with a framed base To support the tracks cartons.
By means of the four wheels positioned at the base it is possible to make the displacement of the same.
Dimensions (mm): 750x1300x520
